Sectional Steel Reservoirs
Square
Sectional Tanks
Hot-dip galvanised bolted sectional reservoirs from 1.82 kL up to 10 ML+ — modular, SANS-compliant and flat-packed for rapid on-site assembly anywhere across Africa.
Interactive General Arrangement
Inspect every component.
Drag to rotate. Scroll or pinch to zoom. Numbered markers cover the pressed panels, bolted seams, corner cleats, roof, walkway and fittings — the same callouts shown on our standard workshop drawings.
Standard Sizes
Square sectional tank dimensions.
Common configurations from our standard panel set. Bespoke footprints are engineered on request — the table below shows a representative selection from 1.82 kL up to 559 kL.
| Capacity (kL) | Panels (L × W × H) | Dimensions (m) |
|---|---|---|
| 1.82 | 1×1×1 | 1.22 × 1.22 × 1.22 |
| 3.63 | 1×1×2 | 1.22 × 1.22 × 2.44 |
| 7.26 | 2×1×2 | 2.44 × 1.22 × 2.44 |
| 14.52 | 2×2×2 | 2.44 × 2.44 × 2.44 |
| 29.05 | 4×2×2 | 4.88 × 2.44 × 2.44 |
| 58.11 | 4×4×2 | 4.88 × 4.88 × 2.44 |
| 98.06 | 6×3×3 | 7.32 × 3.66 × 3.66 |
| 145.27 | 5×4×4 | 6.10 × 4.88 × 4.88 |
| 217.90 | 6×5×4 | 7.32 × 6.10 × 4.88 |
| 326.85 | 9×5×4 | 10.98 × 6.10 × 4.88 |
| 522.96 | 12×6×4 | 14.64 × 7.32 × 4.88 |
| 559.28 | 13×7×4 | 15.86 × 8.54 × 4.88 |
Panel module: 1,220 × 1,220 mm. Full schedule covers 1.82 kL – 559+ kL across 200+ standard configurations.
Need a custom configuration?
Send through your site requirements and our engineering team will return a tailored specification, drawing pack and quotation.